• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6mm-250 bullet selection

I have a Pacnor 3 gr, 1-11 twist barrel on my Rem 700. I am looking for suggestions for a good bullet and load for it. Paper punching loads.
 
You are going to be limited to bullet weight with that 1 in 11" twist. Prob 75 gr will be about max. You may get an 80 to work but you'll just have to try.
Reid
 
I use 39 grains of h-4350 and a 115 grain berger bullet in a pac-nor 6 groove 7 twist.
also,don't forget h-414,it is cheaper and 39 grains of it and a 107 sierra works well,i would think either of these powders would serve you well.
I have tested h-4831 short cut at 42 grains and the 115 grainers and it also shot well.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,839
Messages
2,204,546
Members
79,157
Latest member
Bud1029
Back
Top