SELLING 6mm 12 Twist Heavy Barrel Prefits

[urbanrifleman]

I have a bunch of 12 twist 6mm coming if anyone would interested.

They are unturned blanks so I would have to contour them.

 

[k80skeet]

I have a bunch of 12 twist 6mm coming if anyone would interested.

They are unturned blanks so I would have to contour them.

Bradley, If I hadn't already bought one of these I would do it again.

 

[gtl1946]

Would be good for something in the 6 BR family shooting 80grn FB bullets at 100-600yds .

 

[AckleymanII]

Great for:

6 BRA with zero freebore
6 XC with short freebore
243 Win with short freebore
and on and on!

 

[urbanrifleman]

Bradley, If I hadn't already bought one of these I would do it again.

I never got a report

 

[urbanrifleman]

So they just shipped me (10) 12 twist unturned blanks.

Somebody order some barrels.

 

[k80skeet]

I never got a report

It is Laying on the bench still all wrapped up the way it came. I was playing with a couple of rifles that still aren't done a 300 Win Mag with a 28" Lilja 3 groove barrel and a 6mmbr with a 1 in 13 1/2 twist Krieger 30" 1.25 full length. It is 10 below zero here today. So shooting is months away. I hope to try that barrel by the end of next summer. I will be sure to let you know when I do.

 

[urbanrifleman]

The 12 twist barrels I have coming are Wilson stainless.

 

[urbanrifleman]

Blanks are here.

People were bugging me to get some, so I did. Come get one!

 

[k80skeet]

Blanks are here.

People were bugging me to get some, so I did. Come get one!

I did for sure. Now when you get the 6mmbr zero bore I might get another. I would love to have one with a .268 tight neck. I have a couple of these that I had done to Savage barrels and they are Great.

 

[urbanrifleman]

I did for sure. Now when you get the 6mmbr zero bore I might get another. I would love to have one with a .268 tight neck. I have a couple of these that I had done to Savage barrels and they are Great.

Hmmm.... well maybe you should order your own reamer.

 

[k80skeet]

Hmmm.... well maybe you should order your own reamer.

Sounds like a plan. I will call you and see who you talk to at Mason. That way I will have a reamer to do any new barrels.

 

[urbanrifleman]

Sounds like a plan. I will call you and see who you talk to at Mason. That way I will have a reamer to do any new barrels.

You will very happy if you own your own

 

[sstkmkrr]

Brad

Put my name on one of the Wilson HV 12 Twist 6mm. Would like it in a 6BRA. PM as to purchase payment and NK: .272, FB: .050 spec's. Brad, lets talk about the FB: As I'm setting on 8K Nosler 6mm 55 Gr Bullets in my catch of Bullets!

Thanks

Steve Murphy
sstkmkrr

 

[urbanrifleman]

Brad

Put my name on one of the Wilson HV 12 Twist 6mm. Would like it in a 6BRA. PM as to purchase payment and NK: .272, FB: .050 spec's. Brad, lets talk about the FB: As I'm setting on 8K Nosler 6mm 55 Gr Bullets in my catch of Bullets!

Thanks

Steve Murphy
sstkmkrr

You want the zero.

 

[sstkmkrr]

Yes! Zero Free Bore! 6BRA NK: .272 FB: Zero Remage Thread!

Thanks Brad!

Steve Murphy
sstkmkrr

 

[moorepower]

Are they 1.25 straight?

 

[urbanrifleman]

Are they 1.25 straight?

If you want. Fine with me. Might look funny with the nut.

 

[Thauglor]

This has probably been asked before, can you do fluting on the barrels?

 

[urbanrifleman]

This has probably been asked before, can you do fluting on the barrels?

No, but customers send them to be fluted after they are done.