6BR Loaded Neck w/ Lapua Brass?

[rcw3]

Just curious what you get as a loaded neck diameter with Lapua 6BR brass. I assume the diamter at the mouth of the case is slightly less than at the junction of the neck and shoulder. Any help on those dimensions would be appreciated.

Robert Whitley

 

[fdshuster]

RCW3: Lapua 6BR loaded neck dia. is a consistant .2685" from the mouth of the case all the way back to near the neck/shoulder junction. Works fine with my no turn .272" neck, cut with my Pacific Tool reamer.

 

[rayjay]

Mine are .270 at the pressure ring and .269 at the neck. About .2695 just above the shoulder.