6br dies

[AlNyhus]

A Redding 77317, Harrels #2 or Wilson and some bushings and your ready to go.

 

[charlie b]

Dumb answer: Depends on the die, and how you want to use it.

My arbor press (neck only) LE Wilson die just uses a bushing - final interference fit is set by selecting the bushing, rather than opening it back up with an expander.

I believe some (most?) FL bushing dies use an expander plug (I don't have one - I have a Redding neck only die that has a decapper built in, but no expander plug.) On that note, I see no reason you couldn't get rid of the expander and set diameter with just the bushing. You'd still need a decapper assembly, unless you do that as a separate step. But many people like using a plug of some sort to set the neck tension; up to you I guess.

LOL Yep, depends is always the correct answer.

That was what I wondered. A neck size only bushing die works with no expander button. Leads me to assume a FL bushing die would also work with no expander button, given that the proper bushing is selected. But, I don't like to assume things

And, yes, I can decap without a button in the FL size die, or with a separate die.