6BR Dasher primers

[JoeMcNeill]

Since CCI 450's are all spoken for in the foreseeable future has anyone used Winchester SRP, CCI 400 or Remington 71/2 BR primers in a 6BR Dasher? Would you share your results please. Also, any information on 7208 XBR results in the Dasher would also be helpful.
Regards,

Joe McNeill
SW Arkansas

 

[Stubb]

I actually had better SD and accuracy with my Dasher using Wolf SRM primers. Tula primers are the same.
David

 

[dogdude]

Joe, if no cci 450's available, try rem's 7.5. they are a little hotter so back off the powder and work your way up.

 

[savagedasher]

David is spot on.I have 4 dashers and several of my friend have the same we all use wolf primers I use my 205m for fireforming. 7208xbr is too fast burning for 105 bullets.
My favorate load with 30''tube 105 Berger hybrid Wolf smr 36.4 H4350.With.130fb.
One problem before you try to load it you must use a 12'' drop tube with slow pour
Good Shooting Larry

 

[normmatzen]

+1 on the Wolf/Tula.

I shot Wolf LR for two years blowing out my 243 WIN bench rest barrel. Now I have a 6BRX and started with 1000 CCI BR4 primers as Wolf were not available locally. Found 2000 Wolf SRM and now shoot them with NO statistical performance difference.

I say statistically as I am unfortunately a retired Electronic Engineer and statistics rule!
I don't make decisions based on one day shooting 25 rounds. I have shot 500 of the SRM primers to base my decision to stick to Wolf/Tula

 

[PALarson]

I have been using CCI BR2 and BR4 as needed, I tried the Wolf primers and found them to be accurate and reliable at 1/2 the cost. Well guess what I am now using.
Paul Larson

 

[RDavies]

+1 more on the PMC/Wolf/Tula primers for 6BRs or Dashers. They work well on paper and over the crony.

 

[jonbearman]

I have never heard of 7208xbr but I have used xbr8208,just saying.