600 yard BR rigs.

[yat3b35]

Been thinking about trying my hand at 600 yard Bench Rest,and would like to see pictures of some of the rigs you men are using, and maybe a bit of info on the format used. Thanks in advance , John

 

[cmillard]

go to the main message board and go under gun pix--you'll see a lot of nice set ups!

 

[P1ZombieKiller]

Here is my 6br that I set of for 500 yards.

Rem 700 trued action
28" 1.250 straight PacNor barrel 1:8 with Harrell’s muzzle break
Bolt bushed and pin turned by Gre-Tan
McMillan A-3 stock
Badger 20 MOA base
Jewel trigger
NF rings
Sightron S3 8-32x56

 

[yat3b35]

Nice rig, thanks for sharing. John

 

[skeetlee]

come on fellas. This could be fun. Everyone likes looking at cool toys. Here is my 6.5 creedmoor. Its a true hammer!!!! I think i need to get another barrel for it, maybe a 1.250 8.5 twist 6br?? I can use the Creedmoor for windydays, and the BR for still summer days. Enjoy Lee

 

[mikecockcroft]

Where did you get that recoil pad for your Shehane stock?
I have a new ST 1000 that i want to use a soft pad on not the aluminum one for my daughter.

 

[yat3b35]

Thanks Skeetlee , very nice looking rig. I'm waiting on a Baer MBR stock inletted for my Remington model 700 chambered in 6mmbr. Not sure if 6mmbr is enough for 600 yards but gonna try it. The Baer MBR looks almost like the Shehane. The stock is ready except for the installation of the recoil pad. I know I don't need a recoil pad for the 6mmbr , but may someday go with a larger caliber , therefore the recoil pad.

 

[noload]

6BR is very good for 600yds. Here is my rig I can use on a bench or F-Class open. 6mmbr, My homemade stock holding a Savage target action.

 

[hawghunter]

noload do you make those nice looking stock for other people thanks Mark

 

[Mark Walker in TX]

Here's mine. Tried to sell it before and had two folks back out, so I put it back in the safe... I'm focusing on F-Class, so she is not getting out much.

 

[25AI260]

not a Br but it is my first wildcat .250 Humdinger 700, basix 2oz, 40X stock, bartlien 28"ss

 

[yat3b35]

I finally got my stock finished . It's a Baer MBR laminate. I finished it with 6 coats of hand rubbed linseed oil . Note the missing bolt , it's on the other side of the country at Gre-Tan's having the firing pin hole bushed ,and the pin ground to fit both in length and od.

Trued Remington model 700 , Krieger HV barrel 26" , 269 neck , .104 free bore. Leupold 45 competition 1/8 min dot. Jewell trigger set at 2 oz.

 

[therifler]

Hey nice rifles guys alittle bit about 600yd game that has absorbed me . First just about every record that has been set was set with a 6mmbr . I shoot a 6.5 x250 ackley you can see my rifles at my web site if your interested . www.therifler.com click on Championship page they are the two bottom guns . I shoot light and heavy gun . The thing I like about 600yd is you shoot 4 targets and we don't chase you home if you shoot a bad relay . You get 5shots for record at each target plus sighters most of the fellas like that they come to shoot .you get 6 minutes for sighting in on the first target you get 10 minutes to shoot record target . you can shoot your rifle light with a break and heavy without the break in IBS . PM me if I can be of any more help to anyone .

 

[Xerothermic]

come on fellas. This could be fun. Everyone likes looking at cool toys. Here is my 6.5 creedmoor. Its a true hammer!!!! I think i need to get another barrel for it, maybe a 1.250 8.5 twist 6br?? I can use the Creedmoor for windydays, and the BR for still summer days. Enjoy Lee

Never thought of hanging my Uniflow like that.