• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

600/700 Trigger interchange?

Jim Hankins

Gold $$ Contributor
Will 700 triggers work on a 600 Mohawk action? I have a Jewell and a couple Canjar single set triggers for 700's.My 600 is out of state getting re-barreled and currently has a Canjar LP. I want something with a safety.Thanks!
 
A model 7 trigger and a 700 the only difference I can see is the bolt release. So you might be able to make one work ?
 
Timney makes a direct replacement for the R600 and you can order it with a specific pull weight. If you haven't used a Timney recently I think you'll find them to be excellent.
 
IME -a Jewell benchrest trigger will work on 600, 700 and XP 100 actions. I have no idea if the others will work because of the safety.

Rick
 
The only variable of a 700 & Seven trigger group is the bolt release lever.

A 600/660 trigger group is the same with the exception that the trigger lever is off set forward to clear the trigger guard bow.
 
Dan is right. The trigger shoe hits the rear receiver screw. Been there.
29w9zwk.jpg

Tou can see that the 600 has a short tang that does not allow the 7 or 700 trigger to be used.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,257
Messages
2,215,321
Members
79,506
Latest member
Hunt99elk
Back
Top