6 xc loads

[barnjoer]

30 inches

So you are also using A 30" barrel, is that what I understand.

 

[Milo 2.0]

I run 38.9gr of VV N550 behind a 105 hybrid at 3075fps.

 

[barnjoer]

I run 38.9gr of VV N550 behind a 105 hybrid at 3075fps.

Thanks, I will be loading 115gr Berger VLD since that is all I can get at this time.

 

[jr600yd]

Developed a load. 107 SMK's Molly, 40.5 grs AA-4350, fireformed Lapua 22/250 brass, Fed 210 primer, 3,050 fps.
In my rifle it hammers at 500yds

 

[6xcshooter]

try 42gr H4831sc with 105gr bullets

 

[big john 5394]

30 in bbl 40 gr h4350 115 old dtac .060 group 4 shots

 

[Hpwrshooter]

38 gr of H4350 when available. 37 gr of Imr 4350 as a good second. Both loads good to go with 70gr MK, 85 GK and 107 MK

 

[Hengehold]

Hello all,

I am building a 6 xc, and every where I look loading powder of choice is h4350, or a few others I can t get my hands on. I have found people talking about varget and imr 4350 , but no starting loads are given, I have and can get these powders so I would like to start with these loads, so any help would be greatly useful. My rifle I has 28 inch 8 twist barrel and I intend to shoot 105 and 107 grn. Bullets thanks in advance

Here is what I am using.

IMR 4350, 39.0 gr
107gr SMK naked
PMC primers
26in barrel
MV - 3020fps


I have also used:
H4831, 41.0 gr
105 Berger (no not believe they were coated)
30" barrel
MV - ? Don't have a record of the velocity but this shot very well at 1,000yds.