• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6 super Lr

Gunnut26

Silver $$ Contributor
Looking to get a reamer made for the 6 super Lr and wanting to shoot 103 to 105 grain bullets, should I get the .120 freebore length or get something shorter.
 
I had two reamers made from JGS . One was done with 0.095 for 95grn VLD's and 95grn SMK'S.
The other was done for the 108 berger.
With a 0.115 and let's me shoot heavier with out worrying about touching the donut in the neck
 
I had two reamers made from JGS . One was done with 0.095 for 95grn VLD's and 95grn SMK'S.
The other was done for the 108 berger.
With a 0.115 and let's me shoot heavier with out worrying about touching the donut in the neck
Thank you, that's some information that I was looking for, I'm going to go in the middle and have one ground with .108 freebore
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,269
Messages
2,215,543
Members
79,513
Latest member
Pip1987
Back
Top