• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6 PPC Brass

Jim

I am leaning that way. I would like to purchase the brass already processed. Any ideas where I should look for it. I know there are several places that will do the work.
I got some prepped brass from LarryDScott last year. I recall about $2 each. He's worth a call.
Try to call these folks for Norma 6ppc or 22ppc brass. http://huntingtons.com/

Great people to deal with and usually have it in stock when no one else does. JME. WD
EuroOptic carries precious little reloading gear, but they have kept Norma PPC brass consistently in stock. Unfortunately they only have 22 at the moment.
 
Exactly. Get yourself some neck turning gear on the next go around. It’s easy to do and worth it in the long run.

Some guys hate to turn brass and some people like it. In December I usually have all my brass turned for the next year. I don't like putting things off. Buy good tools and they will pay for themselves if you like turning brass. I turned a few thousand rounds with a marquart and another similar tool for my PD rifles back before Benchrest. When I started shooting a PPC I bought a Pumpkin. Best tool I have used, thanks Don. Too bad they aren't available. It looks like there are a couple of decent alternatives out there though.
 
Some guys hate to turn brass and some people like it. In December I usually have all my brass turned for the next year. I don't like putting things off. Buy good tools and they will pay for themselves if you like turning brass. I turned a few thousand rounds with a marquart and another similar tool for my PD rifles back before Benchrest. When I started shooting a PPC I bought a Pumpkin. Best tool I have used, thanks Don. Too bad they aren't available. It looks like there are a couple of decent alternatives out there though.

Always wanted to try a Pumpkin but never had the opportunity. I’m a big fan of the PMA tools. Easy to adjust and the necks turn out very nice with a smooth micro finish. Works great on my PPC cases. I have some 21st Century gear for a 30BR, and I don’t like it nearly as much. Not even close IMO. I’m eventually going to sell it and do my 30 brass with PMA as well.

You going to the Hogroast?
 
Always wanted to try a Pumpkin but never had the opportunity. I’m a big fan of the PMA tools. Easy to adjust and the necks turn out very nice with a smooth micro finish. Works great on my PPC cases. I have some 21st Century gear for a 30BR, and I don’t like it nearly as much. Not even close IMO. I’m eventually going to sell it and do my 30 brass with PMA as well.

You going to the Hogroast?

Sounds like the PMA tool does a good job. Tools like the Pma have came a long way since the Marquart I used a long time ago.

No Hogroast this year. Lots of stuff going on at work.

Later
Dave
 
I had a pumpkin and a stiller copy. They work well but i prefer to be able to see the cutter. I like the pma micrometer one or a k&m
 
I got some prepped brass from LarryDScott last year. I recall about $2 each. He's worth a call.

EuroOptic carries precious little reloading gear, but they have kept Norma PPC brass consistently in stock. Unfortunately they only have 22 at the moment.

That was all that I had. I had already sold the rifle. LDS
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,299
Messages
2,216,237
Members
79,554
Latest member
GerSteve
Back
Top