6 mm 115 questions

[esromvre1]

Trying to work with these still new to the 6 mm side

What are the accuracy speed nodes for most of these 115 Don Lahr, 115 dtac, 115 vld.

Loads for and thoughts on each of these calibers.

243AI
6XC
6BRX
6DASHER

Any info would be great

 

[B muzguy]

Don't know about the cartridges you mentioned but the 6 mm Creedmoor with 115 dtac 2930 muzzle velocity with h4350 was my accuracy node 28 " bull barrel

 

[Bill Norris]

115 gr. Nosler RDF bullets shot very good ( 3/8 MOA @ 100 yds.) from my .243 AI 26 " 1 - 7.5 Tw. barrel blowing out brass. Have more loaded in the blown out brass but have not had a chance to shoot. Did not chrono.

 

[dstoenner]

The 115 dtac is my go to round for 1000. I shoot 6x47L so not one of you listed calibers. My 1000 yard load is 39.2 h4350 with lapua brass and 450 primers. Velocity is 2950.

i am sure that there is probably another node higher but this load has better numbers than my 260 rem with 140 hybrids i shot for 4 years. Since it is known distance i am fine with it and it isn’t as hard on the barrel

david

 

[Dgd6mm]

I have shot a 6mm Competition Match with the 115 DTAC at 3150 with extreme accuracy. My newest barrel I haven't chronographed yet, but hoping for the same results with this barrel. 28" Kreiger.

 

[esromvre1]

Looking like 2930 to 3150

 

[EdHarley]

I found a node for the 6XC with the DTAC, RL 16 @ 39.8gn and 210M primers, Norma Brass.

 

[esromvre1]

I found a node for the 6XC with the DTAC, RL 16 @ 39.8gn and 210M primers, Norma Brass.

Yep that's the one I started with