6 Dasher reamer print

[alan98]

My smith used a different reamer than I thought. Here is the print..is it good or not? Has a shorter FB than I wanted..not sure about the other stuff..still learning.

 

[tclaunch]

The freebore is short for 108 Berger and 105 Hybrids. That doesn't mean you won't get accuracy, just powder capacity infringed, and possible loss of neck tension when bullet seats past sized portion of neck.

 

[alan98]

I'm planning on using 107 SMk, 105 vld, and maybe the 103 spencer. I think I should be ok with those?

 

[rickiesrevenge]

I think you'd be ok with 105 vld's. Its a little shorter than I set mine up but I have had chambers with freebore that short.

Aaron

 

[tclaunch]

I'm planning on using 107 SMk, 105 vld, and maybe the 103 spencer. I think I should be ok with those?

Yes, you'll be fine.

 

[bblackwell]

Bart's 105

 

[rgc54]

Chamber has a 1 degree lead, it will have a longer transition from bore to groove should be good for vld