4xforfun
Gold $$ Contributor
Going to take a brake from shooting and sell a few of my guns. This is a 6mm Dasher(s). BAT "M" R-L-R built by Greg Wahlstrom in 2011 The action was tuned up by Alex Wheeler in 21 or 22. He also replaced the firing pin assy with a roller. Gun comes with SIX Krieger BBLs, 4 of which were done with the same reamer and the sixth chambered by Wheeler. The only issue with gun is the front of the stock....shipping damage. It doesn't affect anything, but it is there. Simple fix would be to cut 3/8ths inch off the end and re finish. Stock is a Wood Bill Shehane ST 1000 African Obechi (SP)
Round count....
#1- 2676 rounds. Set back 1 time in 2013. Still shoots OK, but it got moved to FFing and Dog killing. I won the 2011 IBS 1000 nats with this tube. 1 - 8 twist 4 groove .237 HV contour. .272 neck 30 inches minus the setback. .104 FB. 100(ish) pieces of brass...end of life.
#2- 1741 rounds. This tube started life FFing Dasher brass (600+) Did well at 1 k. Shot a few winter fun matches and it, too, has seen the dog fields. 1 - 8 twist .237 4 groove HV contour. 30 inches. .104 FB. .272 neck. 200(ish) pieces of brass....OK
#3- 1411 rounds. Still shooting. 1 - 8 twist, .237 4 groove HV contour. 30 inches .104 FB .272 neck. 100 pieces of brass
#4 - 1062 rounds. Shoots good. Heavy Palma contour chambered by Wheeler. I think this is .236 bore, 1-8 twist. Not sure of freebore. NO BRASS
#5 - 1146 rounds. Shoots good. HV contour .236, 1 7.5 twist, 4 groove. 28 inches. .104 freebore. .272 neck. 200 PIECES 2X fired but ended up with clickers. Didn't fix them, just grabbed brass form another gun ...200 Pieces....400 TOTAL pieces.
#6- 549 rounds. Shoots good .2705 neck .236 bore 1-7.5 twist 4 groove .2705 neck .104 freebore. 300 pieces of brass.
I will include all of the load development for each BBL. The Aluminum 1 piece 20 MOA BAT rings/ bases are included.
Scope....your choice of the 10 - 60 x 52 March ($1700.00) on the gun, a NF 12 - 42 x 56 BR ($1000.00) Leupold comp 40X (700.00) or naked.
Gun makes easily makes weight (17#) with the March or the N F.
I would like to get $4000.00 for everything (less scope). Don't be scared to PM me an offer. I am a UPS shipper and can ship very cheap, or can deliver within reason. I might have a few Redding Body dies also....I'll have to check.
Let me know if you have any ???
Thanks,
Tod Soeby
Round count....
#1- 2676 rounds. Set back 1 time in 2013. Still shoots OK, but it got moved to FFing and Dog killing. I won the 2011 IBS 1000 nats with this tube. 1 - 8 twist 4 groove .237 HV contour. .272 neck 30 inches minus the setback. .104 FB. 100(ish) pieces of brass...end of life.
#2- 1741 rounds. This tube started life FFing Dasher brass (600+) Did well at 1 k. Shot a few winter fun matches and it, too, has seen the dog fields. 1 - 8 twist .237 4 groove HV contour. 30 inches. .104 FB. .272 neck. 200(ish) pieces of brass....OK
#3- 1411 rounds. Still shooting. 1 - 8 twist, .237 4 groove HV contour. 30 inches .104 FB .272 neck. 100 pieces of brass
#4 - 1062 rounds. Shoots good. Heavy Palma contour chambered by Wheeler. I think this is .236 bore, 1-8 twist. Not sure of freebore. NO BRASS
#5 - 1146 rounds. Shoots good. HV contour .236, 1 7.5 twist, 4 groove. 28 inches. .104 freebore. .272 neck. 200 PIECES 2X fired but ended up with clickers. Didn't fix them, just grabbed brass form another gun ...200 Pieces....400 TOTAL pieces.
#6- 549 rounds. Shoots good .2705 neck .236 bore 1-7.5 twist 4 groove .2705 neck .104 freebore. 300 pieces of brass.
I will include all of the load development for each BBL. The Aluminum 1 piece 20 MOA BAT rings/ bases are included.
Scope....your choice of the 10 - 60 x 52 March ($1700.00) on the gun, a NF 12 - 42 x 56 BR ($1000.00) Leupold comp 40X (700.00) or naked.
Gun makes easily makes weight (17#) with the March or the N F.
I would like to get $4000.00 for everything (less scope). Don't be scared to PM me an offer. I am a UPS shipper and can ship very cheap, or can deliver within reason. I might have a few Redding Body dies also....I'll have to check.
Let me know if you have any ???
Thanks,
Tod Soeby
Attachments
Last edited:
