6 BRA

[varget204]

What is difference between a 6 BRA/ BRAI and a 6 BRX,are they the same ?,been looking for reamer schematic w/ no luck,I want a 6 BR w 40 degree shoulder,no turn neck

 

[Stan Taylor]

I get the impression you are looking for something like this.

 

[newbieshooter]

https://www.accurateshooter.com/cartridge-guides/6mmbrimproved/

6BRX has a shorter neck - somewhat like a dasher? - but retains the 6BR 30degree shoulder.

 

[dogdude]

6 BRA / 6 BRAI are the same..6 BR with a 40 degree shoulder.

 

[varget204]

https://www.accurateshooter.com/cartridge-guides/6mmbrimproved/

6BRX has a shorter neck - somewhat like a dasher? - but retains the 6BR 30degree shoulder.

The BRX has 40 degree shoulder

 

[newbieshooter]

The BRX has 40 degree shoulder

OK. I don't shoot the BRX - so I can only go by what I read here on AS.

 

[gunsandgunsmithing]

The BRX has 40 degree shoulder

Not mine. A dasher does, but every brx I've seen has a 30°.

 

[tmwinds]

The BRX has 40 degree shoulder

BRX has a 30 degree shoulder. Two variations of the BRX, Crones and Whitley.

 

[RampedRaptor]

Nice visual

 

[varget204]

Not mine. A dasher does, but every brx I've seen has a 30°.

Thanks i stand Corrected

 

[johara1]

Not really the Dasher neck is super short, blow length should be 1.550 with the blue box brass for a 1.560 chamber, the old stuff for the 1.570 chamber blow length was 1.560..... jim

 

[Eric Leonard]

BRX has a 30 degree shoulder. Two variations of the BRX, Crones and Whitley.

BRDX has a 40 degree shoulder

 

[tmwinds]

BRDX has a 40 degree shoulder

You are correct, but a BRDX is not a BRX. It is falls between the BRA and Dasher.