So I have been trimming at 1.550 with last barrell going off 6Br reamer specs which would be .010. I'm wondering if thats to short for a 6Bra which is a little longer. Have Alex Wheeler reamer. I use Lapua Br brass and fireform. So to get to .010 under those specs 6Bra, brass just doesn't get that long. So guess asking if just keep to the 1.550 would be ok and not cause issues. Had 3000 rnds on other barrell with no problems. Shot amazing. Probably answered my own question but figured I'd ask. Thanks in advance for any help.
6 bra brass trim length
- Thread starter Bill W
- Start date
Alex Wheeler
Site $$ Sponsor
If your barrel was chambered with a .004 crush your chamber length is 1.566" if not its 1.570". I recommend a .020 gap on on everything.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.