6 BR lapua brass

[Ccrider]

would you pay somebody a 1$ a piece to turn your brass ?

Nope!

 

[Bottom Fodder]

Nope!

Nope as well, and I would not pay to have chamber cut that I would have to turn necks

 

[sportpsyc]

it's already turned to 0.012", so if you don't want to do it yourself you need to consider that in the price....would you pay somebody a 1$ a piece to turn your brass ?

It has actually been hand turned on a lathe, primer pocket and flash hole uniformed, annealed, sized with a Redding Type S and expander ball set at .002 neck tension on a Berger Hybrid 105, and has a $15 MTM box, and is grouped into several hundred per matching lot number. What is a brand new piece of Lapua 6BR brass with tax and shipping going to sell for when they finally get it in stock again? The other thing is, I have fricken 1800 pieces--I have guys saying "Oh, can I buy 50 pieces??" No. Not worth my time to box and mail when I have 1800 of them. If you want 200 or more of them, I'll do $250, and if you buy all of them, I'll give them to you DELIVERED for $225 a hundred.

 

[sportpsyc]

Nope as well, and I would not pay to have chamber cut that I would have to turn necks

I shoot 300WSM as my hunting rifle, and I shoot nothing but turned necks in the factory spec chamber. Redding S bushing die. done. And the neck turned brass shoots a LOT better in the factory chamber than factory brass. As long as you anneal it after every firing, it will last a long time expanding the extra .004 each firing.