6.5 CM Lapua Brass

[saxeTshooter]

I have not seen any LRP Lapua brass for 6.5 CM in a while. I might have to switch to something else. Does anybody know when sites might get them back in stock?

 

[Savagehunter]

See them often in the classifieds here snipershide and rokslide usually around 145 a hundred. From the factory good luck.

 

[wasskeet]

Bullet Central has both primer versions in stock.

 

[saxeTshooter]

thank you

 

[6.5 forever]

I have not seen any LRP Lapua brass for 6.5 CM in a while. I might have to switch to something else. Does anybody know when sites might get them back in stock?

I bought the last box that Bullet Central had this week. It was the only ones I could find.

 

[Kracken McGraw]

I like Lapua for sure but I bought some Starline just to get more use out of some small rifle primers, so far it seems more than adequate.

 

[6.5 forever]

I love Lapua. I'm sure Alpha is as good and they are made less than a hour away. Old people have a hard time changing.

 

[Berrnard]

i was looking for lapua too but got some alpha. i summarize lapua, alpha, adg and peterson are all on the same playing field. i would be happy with either, lapua is my #1 though

Alpha 6.5 Creedmoor LRP Brass with OCD Technology

Product Information Cartridge: 6.5 Creedmoor Finish: Brass Condition: New Quantity: 100ct or 500ct *Same Lot Number Primed: No Primer Size: Large Primer Pocket *This is not loaded ammunition.

www.bluecollarreloading.com

 

[FeMan]

Lapua SRP Creedmoor brass is in stock at Mile High, Euro Optic, Creedmoor Sports, and Midway.

 

[saxeTshooter]

I love Lapua. I'm sure Alpha is as good and they are made less than a hour away. Old people have a hard time changing.

I bought 200 Alpha brass. My Hornady brass load for 143 ELDX is 42.3 gr 4350 and Lapua is 41.6 for similar velocity. Where do you think the alpha brass will end up re: charge weight?

 

[McStocks]

6.5 Creedmoor brass - large & small primer

ttps://www.gunbroker.com/a/my-gunbroker/sell/selling?timeframe=17&filter=0

 

[JMAN80]

I bought 200 Alpha brass. My Hornady brass load for 143 ELDX is 42.3 gr 4350 and Lapua is 41.6 for similar velocity. Where do you think the alpha brass will end up re: charge weight?

Around that 41.6 area….. apples and oranges when it comes to alpha vs Hornady brass.