6.0 Creedmoor ?

[500Stroker]

I have heard tell that someone is doing a wildcat 6 Creedmoor.
I am looking for more info. Where can I get a reamer and a dimensional drawing of the case.
Thanks in advance

 

[Phil]

You have heard correct...

I`m sure all the reamer grinders have a reamer as well as a print available, call your reamer grinder of choice and ask for their assistance and you will get what you need....


Phil.

 

[500Stroker]

You have heard correct...

I`m sure all the reamer grinders have a reamer as well as a print available, call your reamer grinder of choice and ask for their assistance and you will get what you need....


Phil.

Cool Thanks
Who's dies are available?

 

[Phil]

Whidden Gunworks makes 6 Creedmoor dies.....


I`m sure others do as well.....if you intend to get your own reamer, you could just get a 6.5 Creedmoor full length bushing die, change the bushing to the appropriate size and use your chamber reamer to cut a Newlon Precision blank or a Wilson blank for seating dies..


Phil.

 

[500Stroker]

Great info
I see a new barrel in the near future.
Thanks again

 

[Kurz]

500Stroker,

Properly headstamped brass is available through GA Precision:

http://www.gaprecision.net/ga-store/100-pieces-6-mm-creedmoor-brass-new-unprimed-hornady-mfg.html

Dies are also available from Hornady or GA Precision.

Regards.

ADDED:

Copper Creek Cartridge Company has a selection of dies as well as loaded cartridges.

http://coppercreekammo.com/

Regards.

 

[lawman29]

Discussion on 6 creedmoor; http://forum.snipershide.com/snipers-hide-reloading-depot/103774-%2A%2A6-creedmoor%2A%2A.html

 

[500Stroker]

Thanks lawman29

 

[47shooter]

i bought Redding 6.5 creed dies and and put in the right size 6mm bushing and got a VLD seater stem and they work great with the berger 105 hybrids out of my 6 creed. it was almost too easy to get it shooting.. easy to load for and not picky. its a great little round

 

[jaygorski]

If you're wondering about which freebore to get for your reamer I'm using a 104 FB for shooting VLDs and Hybrids, a 183FB for DTACs, Hornady 105s and Hybrids will shoot pretty well with that FB as well. Longrifles Inc. has both of those reamers.