3d printed bag filler

[Fast14riot]

Looking at the 21st Century ($55) and PMA ($30) bag fillers and have to think that someone has made a file for 3d printing for a more reasonable cost that fits a water bottle or Gatorade bottle. Anyone know of any? Or, if someone wants to design one to fit a 38-400 thread and I have a good supply of filament wound tubing (think kite spars) I could cut up for filler nozzles and bottles to fit. Hell, if it were designed to fit a 1lb Hodgdon powder bottle that would be even easier. Maybe this will be the project that forces me to buy a 3d printer so I can spend $500+ to save money on a $30 part (kinda like reloading).

Links to what I'm talking about.

Cool Tool — 21st Century Shooting Sand Bag Filler « Daily Bulletin

Are you tired of struggling to fill your rear sandbags and other sand-filled shooting supports? With a conventional plastic funnel it can be difficult to get the bags filled to full capacity.

bulletin.accurateshooter.com

PMA Bag Filler Sand Funnel/Bottle

The highest quality, most innovative reloading tools and shooting supplies for precision riflemen. Unparalleled customer service. Shop Now - PMA Tool

www.pmatool.com

 

[10XSHOOTER]

Go to your local grocery store and get a dispensing bottle for Ketchup or Mustard.
I've had to cut the tips off and control the size of the hole in the funnel!
Less than $2.00

 

[Fast14riot]

Go to your local grocery store and get a dispensing bottle for Ketchup or Mustard.
I've had to cut the tips off and control the size of the hole in the funnel!
Less than $2.00

Bottles and tubing is not a problem for me (I have a free supply of those) but the specific design of bag fillers like that is what I'm after.

 

[Mike Kohout]

Turkey baster's work real good also. Take off the blub top and there you go.
Mikey

 

[divingin]

The funnel I got from Sinclair (I think) has a tube that, as I remember, could be approximated with a length of metal brake line. There are enough fittings around that you should be able to secure it to whatever kind of cap you want. Though the ketchup bottle sounds easier.

 

[swd]

Looking at the 21st Century ($55) and PMA ($30) bag fillers and have to think that someone has made a file for 3d printing for a more reasonable cost that fits a water bottle or Gatorade bottle. Anyone know of any? Or, if someone wants to design one to fit a 38-400 thread and I have a good supply of filament wound tubing (think kite spars) I could cut up for filler nozzles and bottles to fit. Hell, if it were designed to fit a 1lb Hodgdon powder bottle that would be even easier. Maybe this will be the project that forces me to buy a 3d printer so I can spend $500+ to save money on a $30 part (kinda like reloading).

Links to what I'm talking about.

Cool Tool — 21st Century Shooting Sand Bag Filler « Daily Bulletin

Are you tired of struggling to fill your rear sandbags and other sand-filled shooting supports? With a conventional plastic funnel it can be difficult to get the bags filled to full capacity.

bulletin.accurateshooter.com

PMA Bag Filler Sand Funnel/Bottle

The highest quality, most innovative reloading tools and shooting supplies for precision riflemen. Unparalleled customer service. Shop Now - PMA Tool

www.pmatool.com

Tom has a 3D printer and uses it all the time. Text me if you don't have his number.