338 Lapua Savage reamer

[hoverp]

Hi guys , does anyone know where I could get the reamer drawing that Savage uses for their 338 Lapua chambering? Im trying to setup my reloading process for my new 110 FCP in 338 Lapua and I would like to know the neck dimensions and throat length.


Thanks


Patrick

 

[hoverp]

Ok how about the same question a different way.

for those folks shooting the 338 Lapua with lapua brass and berger 300 grain bullets(or not) what in the loaded outside neck diameter average you are measuring.


Thanks

Patrick

 

[Terry]

http://www.google.com/imgres?hl=en&sa=X&biw=688&bih=639&tbm=isch&prmd=imvns&tbnid=6b2yBoSBwOke0M:&imgrefurl=http://en.wikipedia.org/wiki/.338_Lapua_Magnum&docid=kHL15HOOMzgkIM&imgurl=http://upload.wikimedia.org/wikipedia/commons/thumb/f/fa/.338_Lapaua_Magnum.svg/400px-.338_Lapaua_Magnum.svg.png&w=400&h=284&ei=Je7zTquVNIefgwfoh-igAg&zoom=1&iact=hc&vpx=113&vpy=186&dur=370&hovh=115&hovw=162&tx=114&ty=99&sig=109903509882169038057&page=1&tbnh=115&tbnw=162&start=0&ndsp=10&ved=1t:429,r:0,s:0

Try this.

 

[hoverp]

Thanks, also does anyone have experience with these 3 die sets from redding. the Competition micrometer seater and neck bushing die, and the body die for sizing the body and bumping the shoulder.

http://www.midwayusa.com/product/779204/redding-competition-bushing-3-die-neck-sizer-set-338-lapua-magnum?cm_cat=Cart&cm_pla=ProductDesc


Has anyone used thesea...Ive never just used a body die...and seperate bushing die...I just dont know if the Lapua round takes well to mostly neck sizing with an occasional body /shoulder bump.