• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

32-20 wcf wild cat question

We need a RUGER NO1 sporter 327 fed
Or ruger 77-327 fed.. Left, and right bolt options
( no plastic or pot metal)..the real deal..and shooters will pay up.. I know I would..
Maybe a small special run for accurate shooters forum members..
Please ruger..
What do you guys think?
 
I have love for the .327 federal..in my opinion its a waaaaaay under rated cartridge ..many times I've been shooting steel with .357 and switch to .327..thats when I noticed how cool of a cartridge it is..just playing at the range..
I get all worked up and excited when I read all these post..and start mentally running off on some project that will eventually cost 1000$...when most of the best cartridge have already been standardized..
I also thought of a ruger 77- 44 or 77-357 reworked for 327 fed...for the life of me a can't understand why ruger who developed the cartridge doesn't offer it in a #1 sporter..327 fed..
That would be a hot one..
Think of how fun that would be..sitting there shooting 32sw, 32swL, 32h&r, 327 fed out of the same rifle..im not sure if you could push a 32 s&w through a rifle barrel...hahaha..
But ruger..please...pretty please..
RUGER #1 sporter .327 fed mag with the thingy on the barrel like the african..haha swivel band..
No plastic..the Ruger way..or a riger 77-327 wood stock
32 S&W was a very popular single shot rifle cartridge in its day. Both the standard and long versions were basically center fire conversions of rimfire cartridges. Some rifles had reversible firing pins to shoot both. Minute of rabbit out to about 75 yards is what this 32 S&W would be good for with a good set of eyes.D6933936-B7B3-41C1-9901-31090F25F5D2.jpeg
 
WoW look at that thing...I bet the hammer strike causes more movement then ignition...hahaha..
Look at that pipe ..hahaha..all that steel for a .32..S&W hahah..I love it..
Its beautiful wood chrome steel..
Do you have to pick it up and break open every shot...?

It would be fun to shoot the family of .32 all neck down to .20
20-32 S&W-L, 20-.32 H&R, 20-.327fed.
 
How are you guys managing to crunch these necks down so well..i was toasting brass left and right making 25-20 from 32-20
Its paper thin necks and annealing wasnt the answer.
To take a 30 carbine down to 20cal has gotta take some practice..and a bit of voodoo.
the 25-20 could use a little help..i bet you could catch a 25-20 in a calloused hand
well its not the weak..i wouldnt want shot with it..hahaha
But if youve ever sat at the reloading bench and loaded up a few hundred 25-20 cartridge you already know how fun they are..and when shooting the 25-20 it just feels like ( if only it was a little faster)..to take a 32-20 down to a 20-20..hahaha
Maybe it could run off a puff of trailboss and still zip along..
 
How are you guys managing to crunch these necks down so well..i was toasting brass left and right making 25-20 from 32-20
Its paper thin necks and annealing wasnt the answer.
To take a 30 carbine down to 20cal has gotta take some practice..and a bit of voodoo.
the 25-20 could use a little help..i bet you could catch a 25-20 in a calloused hand
well its not the weak..i wouldnt want shot with it..hahaha
But if youve ever sat at the reloading bench and loaded up a few hundred 25-20 cartridge you already know how fun they are..and when shooting the 25-20 it just feels like ( if only it was a little faster)..to take a 32-20 down to a 20-20..hahaha
Maybe it could run off a puff of trailboss and still zip along..
Forming dies, I'm not home till next week, I'll take a picture of the dies and post if I can remember.
 
I make .20 killer bee out of starline 32-20 and get Phenomenal Results
How many reloadings does your brass last for?
I have 25-20, 32-20 dies, brass, bullet molds . I dont own either rifle anymore and trying to figure out what to do with my stash of components
Im not selling any reloading supplies anymore. Ill just get a pre-fit barrel and shoot untill the brass is used up.
The 25-20 is pretty lame and a waist of components in my opinion. The 32-20 is pretty cool and useful for knocking stuff over.
The 218 mashburn bee looks pretty fun also
Lots of opinion with 32-20 brass.
 
@dellet

go back a couple posts friend, you have a question on this old post and I for one am interested in that thar rifle///
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,642
Messages
2,200,072
Members
79,028
Latest member
Stanwa
Back
Top