SELLING 31 inch 6mm 8 Twist Barrels have arrived

[urbanrifleman]

I have 1.25" LV, HV and I have unturned blanks that I can make extra heavy contours with.

These are 31 inches unfinished. So, they can be 30 inches max. These long barrels will be an extra $75 over the standard 26 inches.

This first batch is 6mm 8 twist.

I'm not selling blanks. Just barrels.

 

[urbanrifleman]

Upcharge for over 26 inches will be $80. So, $409 for long barreled nut barrel or $560 for shouldered prefit.

Obviously, these were more expensive to run.

I hope to get 22-7 and 6mm 7 twist next.

 

[Hoekight]

Upcharge for over 26 inches will be $80. So, $409 for long barreled nut barrel or $560 for shouldered prefit.

Obviously, these were more expensive to run.

I hope to get 22-7 and 6mm 7 twist next.

Do you still have the heavy 8 twist 6mm’s? Looked in the website maybe didn’t look in the right place.

 

[urbanrifleman]

Do you still have the heavy 8 twist 6mm’s? Looked in the website maybe didn’t look in the right place.

I haven't added them yet. Had company at the house.

 

[perazziguy]

These are going to be sweet! Looking foreward to some customer pics.

 

[Rubberduckie]

Can I send you a reamer to use?

 

[urbanrifleman]

Can I send you a reamer to use?

Sure. Need to make sure it has the right bushing.

 

[urbanrifleman]

First one.

 

[Msfinlayson]

Exited for the 6xc 30” on order.

 

[LuvDog]

Looks good. What are the details?

Cartridge?
Finished Barrel Length?
Balance Point?
Total Rifle Weight?

 

[urbanrifleman]

Looks good. What are the details?

Cartridge?
Finished Barrel Length?
Balance Point?
Total Rifle Weight?

For what?

 

[Rewinder]

The Rifle you Posted.

 

[urbanrifleman]

The Rifle you Posted.

My blue one? Kauger CRS, Jewell bottom safety trigger, 6bra 104 fb 8 twist 29 inches, MPA Comp chassis with full weight kit, Nightforce BR 12-42. It probably weighs 25 lbs with the suppressor. It drives like a Cadillac, no idea of the balance point.

 

[mtncwru]

Upcharge for over 26 inches will be $80. So, $409 for long barreled nut barrel or $560 for shouldered prefit.

Obviously, these were more expensive to run.

I hope to get 22-7 and 6mm 7 twist next.

Any chance you've gotten the blanks to allow for a long 22-7 in LV or Light Palma? I'm in the market...

I know I can go with the standard 26", but it's for a Palma gun, so having the extra sight radius is helpful.

 

[LuvDog]

My blue one? Kauger CRS, Jewell bottom safety trigger, 6bra 104 fb 8 twist 29 inches, MPA Comp chassis with full weight kit, Nightforce BR 12-42. It probably weighs 25 lbs with the suppressor. It drives like a Cadillac, no idea of the balance point.

Thanks. It looks like you're running all the internal forend weights, the butt stock weight and the steel bag rider., it's a heavy one. Just curious about how it balances for PRS, but for me, I think it would be too heavy. I'm sure it's rock solid with almost no felt recoil

 

[urbanrifleman]

Thanks. It looks like you're running all the internal forend weights, the butt stock weight and the steel bag rider., it's a heavy one. Just curious about how it balances for PRS, but for me, I think it would be too heavy. I'm sure it's rock solid with almost no felt recoil

Well, of course you can use as much of the weight kit as you want to make it balance exactly wherever you want. I just run the entire thing because I'm not running around with it I'm just shooting it from a bench. When shooting from a bench heavy is good. And way more fun I think.

I highly recommend the MPA comp chassis. It's just wonderful actually. If you want to put together a rifle give me a call. I can pretty much supply this entire rig.

 

[urbanrifleman]

Any chance you've gotten the blanks to allow for a long 22-7 in LV or Light Palma? I'm in the market...

I know I can go with the standard 26", but it's for a Palma gun, so having the extra sight radius is helpful.

Not yet. That will be next.