cb186
Gold $$ Contributor
I have a number of 30mm front sights available.
Long stem version is adjustable from 1 3/8" up to 3 1/8" C to C.
Short stem version is 1 3/8" to 2 1/8" C to C.
Serrations and offset are compatible with Riles and Beach.
Bases are available in both Deluxe and Standard, .750" or .812". All bases have mirage band hooks machined in, as well as machined to accept Scatt mount blocks(optional). The Deluxe version has (2) 1/4-20 thru tapped holes for fine tuning (hardware not included). This feature is for fine tuning by installing a short setscrew and a longer (begin with 3/4" or 1" long screws), testing different lengths as well as fore/aft position to adjust tune. This feature is NOT as aggressive as a typical tuner (but also much lighter and more compact)! Standard bases are about 5/16" shorter than the Deluxe bases.
Knobs, which are machined from 6061 aluminum, just like all components (not just cheap plastic store bought knobs) are available in both 2pt and 5pt and can be configured as either thumb screws (screw is affixed to the knob and can be removed from bases) or as a nut, using a longer screw that stays attached to the base, making the knob captured.
Sunshades are currently available for both Centra and Gehmann, and even have a few direct mount shades if no front lens or Shooting Sight lenses are being used is being used. I will be running a batch of direct fit shades
Scatt mounts are attached via (2) 2-56 flathead cap screws and allow direct mounting of the Scatt sensor to your rifle.
Sights are machined to fit both Centra and Gehmann components. Due to variation in machining or others components, fitment may vary slightly.
Mirage bands are in progress and will be made to order. A rear mounting point will be needed. An 8-32 button head installed at the front of a Picatinny rail works well. Picatinny mount blocks are a future project.
Pricing (tax and shipping additional) credit cards and checks accepted.
Sight Package(sight w/ level, base w/hardware and (2) sunshades - $400
Sight w/level - $225
Bases w/ hardware - $90
Sunshades - $50 each
Scatt block w/hardware - $30
Knob w/hardware - $20
Iris's and lenses are not included and I do not sell them. The following are good resources for 30mm components. If you have suggestions for resources, feel free to share them.
Oberle Enterprises
Creedmoor Sports
Pete Fiori (Competition Equipment)
For questions, inquiries or to order, please email chad@bakkeneservices.com or call me(Chad) at 651-206-2076(leave a VM if I miss your call).
Long stem version is adjustable from 1 3/8" up to 3 1/8" C to C.
Short stem version is 1 3/8" to 2 1/8" C to C.
Serrations and offset are compatible with Riles and Beach.
Bases are available in both Deluxe and Standard, .750" or .812". All bases have mirage band hooks machined in, as well as machined to accept Scatt mount blocks(optional). The Deluxe version has (2) 1/4-20 thru tapped holes for fine tuning (hardware not included). This feature is for fine tuning by installing a short setscrew and a longer (begin with 3/4" or 1" long screws), testing different lengths as well as fore/aft position to adjust tune. This feature is NOT as aggressive as a typical tuner (but also much lighter and more compact)! Standard bases are about 5/16" shorter than the Deluxe bases.
Knobs, which are machined from 6061 aluminum, just like all components (not just cheap plastic store bought knobs) are available in both 2pt and 5pt and can be configured as either thumb screws (screw is affixed to the knob and can be removed from bases) or as a nut, using a longer screw that stays attached to the base, making the knob captured.
Sunshades are currently available for both Centra and Gehmann, and even have a few direct mount shades if no front lens or Shooting Sight lenses are being used is being used. I will be running a batch of direct fit shades
Scatt mounts are attached via (2) 2-56 flathead cap screws and allow direct mounting of the Scatt sensor to your rifle.
Sights are machined to fit both Centra and Gehmann components. Due to variation in machining or others components, fitment may vary slightly.
Mirage bands are in progress and will be made to order. A rear mounting point will be needed. An 8-32 button head installed at the front of a Picatinny rail works well. Picatinny mount blocks are a future project.
Pricing (tax and shipping additional) credit cards and checks accepted.
Sight Package(sight w/ level, base w/hardware and (2) sunshades - $400
Sight w/level - $225
Bases w/ hardware - $90
Sunshades - $50 each
Scatt block w/hardware - $30
Knob w/hardware - $20
Iris's and lenses are not included and I do not sell them. The following are good resources for 30mm components. If you have suggestions for resources, feel free to share them.
Oberle Enterprises
Creedmoor Sports
Pete Fiori (Competition Equipment)
For questions, inquiries or to order, please email chad@bakkeneservices.com or call me(Chad) at 651-206-2076(leave a VM if I miss your call).
