30BR seating die?

[TrxR]

What seating die do you all recommend for 30BR ?

Also whats the difference between a Wilsons Micrometer seater and the Sinclair/Wilsons version?

Can any of the threaded ones do as good as a job?

Going to go with harrels for the sizing die . Can they work off a reamer print or is a couple of 3 times fired cases better?

Thanks

 

[Uthink Uknow]

I use an L.E.Wilson 6BR die opened to .30BR and perhaps they now list a .30BR die. Mine’s old. I prefer the straight line die as there is nothing that can wrong with it’s use. Harrell prefers that you send the fired cases for an FL sizing die. While you’re talking to the Harrells get one of their combo presses for arbor press and threaded die.

 

[JFrank]

Sinclair / Wilson adds a fancy top on the seater. Both will do the same job.

A cheap Hornday seater will seat equally with regards to runout.
I know this for a fact

 

[ckaberna]

Wilson. I have a Sinclair as well and much prefer the Wilson

 

[madmixerman]

I use the Wilson Sinclair micro adjust seater. It clicks on adjustment where I don't think the other micrometer die does. It will adjust to half a thousandth .