• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

300 WSM brass flow

New to the forum so sorry for whatever. 300WSM Stiller predator action, 26" lilja 3 groove barrel, using federal brass, 180gr accubond @ .08 from lands, loading with 68gr of reloader 19, 3020fps, also this was once shot brass. Shoots great but the brass is flowing into the ejection port at base of shell. I have also tried 165 gr, once I hit 3200fps I have the same problem. I've dumbed it down and using Winchester brass now. Im in need of reloading again and would like to get a 180 to 3000. Any thoughts on brass or other things I'm doing wrong. Would appreciate your thoughts.
 
Dumbed it down? Like just backed off the powder? Sounds like the solution, if so. You might need tougher brass if you want to push it. Brass flowing is sure sign of over pressure. Can I ask what's the difference between 3000 and ~2950?
 
First, welcome to the forum.
Second: All guns are different. I’ll add to Adam’s comment about over pressure. You’re pushing into a dangerous area. You should back off your load. What you would “like” doesn’t matter. What is safe in your particular gun does. Loading manuals are a guide, but some guns won’t shoot their max loads safely.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,819
Messages
2,223,685
Members
79,910
Latest member
Kenhughes94
Back
Top