300 wsm 100 rd cartridge case, loaded point up ??

[6bra1k]

i have 100 rd point DOWN cases, but really want POINT UP.
NOT a small brief case nor a suit case. fir on the bench while shooting.
something like an mtm, but point up.
the adg boxes fit but are only 50 and silly me i want 100.
help

 

[46and2]

This might be a dumb idea but can you attach two ADG boxes side by side?
Epoxy both to a board or something similar?

 

[Plumsask]

Make one out of wood, lacquer it. That's what I did. Split independent half lids

 

[INTJ]

Hard Ammo Case - Unknown Munitions

Small, Medium, and Large cases all hold 50 Rounds. The 100 Round case is the only one that holds 100 rounds and only comes in 1 size. Add our laser engraving upgrade to your ammo case found HERE Ammo box, the ultimate protection for your precision ammunition. -IP67 Waterproof rating on all...

www.unknownmunitions.com

 

[6bra1k]

https://www.amazon.com/MTM-Deluxe-H...ae1bbc&pd_rd_wg=Y9Y4X&pd_rd_i=B000PW5HF6&th=1.
Look at the side pic on the left. The cartridge can fit point up. 4th pic down.

yes but not at my coal...thanks

 

[6bra1k]

Hard Ammo Case - Unknown Munitions

Small, Medium, and Large cases all hold 50 Rounds. The 100 Round case is the only one that holds 100 rounds and only comes in 1 size. Add our laser engraving upgrade to your ammo case found HERE Ammo box, the ultimate protection for your precision ammunition. -IP67 Waterproof rating on all...

www.unknownmunitions.com

yes but, the size is almost 4x that of the mtm, so not shooting bench freindly
thanks

 

[6bra1k]

sooooo
the 100 rd mtm case has a small hole with fingers for the point down on the bottom of the rack.
think i am going to drill out the hole to a thru hole and then add padding as needed to bring the case/cartridge to the desired height.

 

[6bra1k]

So your rounds are longer than a 375 h&h or 300 Weatherby cartridge, Which the brass alone is 2.85 in.

they insert those point down, i am wanting point up

 

[6bra1k]

so took the tray out of the mtm and being in a hurry i simply ran my 300 wsm reamer thru a couple of spots and BINGO, MY AMMO CAN NOW GO IN POINT UP/
just need to figure out spacing under and maybe foam in the lid
houston we have lift off!

 

[6bra1k]

well well well
WHAT MTM DID NOT MENTION was that the tray is ADJUSTABLE!
WITH THE MTM TEXT inline ,the tray is high, if you pull the tray out, rotate it 90*.
it sits LOWER...and my rounds fit point up!!!
now i just need to order a new tray for the one i modified!

 

[6bra1k]

Rewinder said:
"So your rounds are longer than a 375 h&h or 300 Weatherby cartridge, Which the brass alone is 2.85 in."

my 300 wsm ammo is over 3.1 and my 300 wm runs 3.5-.6