Old thread, I wonder if anybody will read this….
Doing a 300WM LOAD for Tikka Veil 1:10
220gr Hornady ELD-x, 1 time fired federal brass, N565, CCi LRMP, COAL max magazine 3.3420
71 grains had a ES of 2
velocities of 2612 2610 2612
72.5 grains had a ES of 22
velocities of 2692, 2670, 2686
73 grains had a ES of 22
velocities of 2688 2676 2662
Anybody have any experience is N565? Doing seating depth test next.
I'd like to see you shot from a front rest and rear bag instead of a leadslead.Old thread, I wonder if anybody will read this….
Doing a 300WM LOAD for Tikka Veil 1:10
220gr Hornady ELD-x, 1 time fired federal brass, N565, CCi LRMP, COAL max magazine 3.3420
71 grains had a ES of 2
velocities of 2612 2610 2612
72.5 grains had a ES of 22
velocities of 2692, 2670, 2686
73 grains had a ES of 22
velocities of 2688 2676 2662
Anybody have any experience is N565? Doing seating depth test next.
what was your c.o.l? also what was your recipe for h1000?Have used H1000, RL 22 and VV N550 with great results with 200.20X Berger, Hdy 208 ELD-X and ELD-M, and Hdy 220 ELD-X. Savage 110 elite precision 30” barrel 1:10 twist. Did my own recipes with IMR 4831, H4831and H4831SC to throw Hdy 225 ELD-Match. Sweetest has been using IMR 4831 (with nearly identical #s with H4831). So far not seeing any significant temp instability with IMR but will switch to Hodgdon when my stock is depleted. Using fire formed Lapua brass (1-3 firings), and BR-2 primers. Results - Two wide nodes: lower node sweetest spot was 66.2 gr (2797 fps, SD 2, ES 4 w/ .21” group). Entire node centered on 65.9 gr with avg velocity at 2795 (64.5-66.5 w/ SD 9, ES 19 to SD 4, ES 8 and groups .39” or less). Upper node sweetest spot (and node center) on 68.0 gr with avg velocity of 2839, SD 3, ES 6 w/ .18” group. Entire node spanned 67.7-68.5 w/ SD 9, ES 19 to SD 7, ES 13 and groups .38” or less.