I just started running some load work on 200g eld-x bullets through my 300 win mag. Have done load work for the 212"s with very good results. My most accurate BTO is set and I am up to 78g H1000, Fed 215 primers and WW brass. Getting 3004 mv through the labradar and no pressure signs atall. Smooth bolt operation, no primer flow and measurement above the belt is fine. Anyone have any loads they like for this bullet? I have not seen much out there and was just curious. Probably won't go any higher than 79g of H1000. Quickload, after making adjustments, is pretty close to my results and I ma close to maximum. Anyway thanks for any info.
300 win mag - 200g Hornady Eld-X
- Thread starter Stanley basin
- Start date
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.