30 BR QuickLoad Weighting Factor

[Steveb]

Does anyone have any experience with 30 BR in Quickload. I am having trouble finding or calculating the weighting factor for this cartridge.

I have read the the WF is calculated by this formula. WF= 500 x cross sectional area (from QL) / maximum case capacity (from weighing a case).

According to my numbers this works out to be .95.

However, a caution was given not to trust WF numbers outside the QL limits which this certainly is.

Any information would be appreciated.

 

[Straightshooter1]

Does anyone have any experience with 30 BR in Quickload. I am having trouble finding or calculating the weighting factor for this cartridge.

I have read the the WF is calculated by this formula. WF= 500 x cross sectional area (from QL) / maximum case capacity (from weighing a case).

According to my numbers this works out to be .95.

However, a caution was given not to trust WF numbers outside the QL limits which this certainly is.

Any information would be appreciated.

Maybe you can determine something from this:

 

[Murray Brook]

I checked my GRT and QL program and both use .5 for the 30 BR.