• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

280 Rem Imp 40° Dies

Dusty Stevens said:
I disagree with that being the best version but i respect your opinion. They changed a 50yr old version .014 and have caused a bunch of guys trouble like this OP. They could have called it anything but an ackley when they changed it from ackley design. They could have called it a 280nosler and it would have been fine with everybody. Now they leave me with 2 reamers labeled the same that are different and dies are a nightmare until it gets decoded in this post by you and a search will reveal this happens everytime a used gun is bought
Click to expand...
Dusty, I feel that the die makers (ALL of them, not just Redding) should simply include both shellholders in their die sets. Easy-peasy way to address the issue.
No different than the spacer that comes in 38 Spl/357 Magnum dies.
The first time I ran into this, facing a standard shellholder .014-.015 did the trick.
Hopefully this will shed some light on the situation. - Al
 
Last edited:
AlNyhus said:
Dusty, I feel that the die makers (ALL of them, not just Redding) should simply include both shellholders in their die sets. Easy-peasy way to address the issue.
No different than the spacer that comes in 38 Spl/357 Magnum dies.
The first time I ran into this, facing a standard shellholder .014-.015 did the trick.
Hopefully this will shed some light on the situation. - Al
Click to expand...
That would be SOOOOO nice but, right now, I'm finding that the Redding #1+.014 shell holder is as hard to find as the dies I need.
 
Space the SAAMI die .014" above the shell holder with a feeler gauge, and it should work well enough to get you to your next step.
 
Dusty Stevens said:
I disagree with that being the best version but i respect your opinion. They changed a 50yr old version .014 and have caused a bunch of guys trouble like this OP. They could have called it anything but an ackley when they changed it from ackley design. They could have called it a 280nosler and it would have been fine with everybody. Now they leave me with 2 reamers labeled the same that are different and dies are a nightmare until it gets decoded in this post by you and a search will reveal this happens everytime a used gun is bought
Click to expand...
Exactly why I decided just to do the straight 7mm Exp/280 Rem. The two Ackley versions had too many caveats for me to chase an extra 100-125 FPS.
 
Tinman102000 said:
I talked again to Redding yesterday and they don't and won't make them any more because the catalog number for them was transferred to the SAAMI chamber dies now. I will check with Whidden. I was hoping someone had a set they wanted to part with or trade for a new set of Redding SAAMI chamber dies.
Click to expand...
If you send Redding a few fired cases they will see which die fits your chamber.
 
DHuffman said:
If you send Redding a few fired cases they will see which die fits your chamber.
Click to expand...
Thanks, I already talked with them on a few occasions and they told me which dies I need and told me they do not manufacture them anymore. The catalog number carries over to the SAMMI dies now. The gentleman's suggestion was to either find a used set or find a #1-.014 shell holder in stock somewhere.
 
Tinman102000 if you haven’t found what you are looking for over the weekend, I’m pretty sure there is a set of old style dies (used) at a local gun store that I frequent and I’ll see if I can get them for you. It shouldn’t cost too much and I’ll get with you on the price before I do anything.

Have a great weekend,

TSY
 
Tinman102000 said:
I was going by what Redding told me. They said they make a #1+.014 just for the early Ackley chamber issue. This is why I would rather just find a set of the correct dies. Just makes things easier.
Click to expand...
Just looked at redding catalog and it seems they must have changed their shell holder numbers. You were right. If you find one grab me one too.
 
Tinman102000 said:
I talked again to Redding yesterday and they don't and won't make them any more because the catalog number for them was transferred to the SAAMI chamber dies now. I will check with Whidden. I was hoping someone had a set they wanted to part with or trade for a new set of Redding SAAMI chamber dies.
Click to expand...
I have what that your looking for. I don't have seater have Redding FL bushing sizer and bushing neck. The box FL sizer was marked 280 Rem Imp 40 and die is marked 280 Imp 40. I also have Redding body die box is 280 Rem Imp 40 and die is mark same as other 2.
 
Last edited:
Do a search on these forums. There was a very long thread arguing about the differences. Dave Kiff showed that there wasn’t really a difference. He said the datum was just measured differently. I don’t recall how many years ago, but approximately 6-8. I think the reason people got confused was in the max to minimum tolerance.
 
Ringostar said:
Do a search on these forums. There was a very long thread arguing about the differences. Dave Kiff showed that there wasn’t really a difference. He said the datum was just measured differently. I don’t recall how many years ago, but approximately 6-8. I think the reason people got confused was in the max to minimum tolerance.
Click to expand...
Well, According to Nosler and blown primers as well as a chamber casting, the SAAMI Chamber is .014 shorter allowing to much head space in a traditional chamber. So yes, there is a difference.
 
gunsmithtalk.wordpress.com July 17 2012. Please check out this article. It shows that if the original Ackley chamber was done correctly, there is no difference. People have been believing internet rumor. It even states that the .014 measuremen is not done in the same place. I’m not trying to argue, just trying to help others.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,825
Messages
2,204,321
Members
79,157
Latest member
Bud1029

Share This Page

Back
Top