• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

270wsm

well, I was wondering if any body has a good load for the 130gr nosler balistic tip in 270wsm. only shot a box of factory and a few reloads. boy, you really have to hang onto that gun to hit anything. several of the factory rounds had loose bullets in them that is you could turn them with your fingers. whats up with that? Thanks in advance______treeman
 
treeman, I have a .270 WSM in a Browning A-bolt stainless stalker and you are correct, it will rear with you on recoil. It is my main go to hunting rifle. I don't shoot factory loads at all. Never found any that I thought was accurate for any rifle as far as that goes. My first and only hand loads for my rifle is the 130 gr. Ballistic Silver Tip on top of 65.0 gr. of RL-19 with a Fed 215 GM Match primer in Remington brass seated .010 from the lands. It chronoed at around 3350 fps at 100 yds. and shot the first 3 bullets out of the clean new bore into one ragged hole. It has also done that several times in the past. Well, three or four anyway. I don't shoot it from the bench only to check my new loads each year before hunting season. No need to beat on it. It is my meat getter. I hope this helps. Bill
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,252
Messages
2,214,891
Members
79,496
Latest member
Bie
Back
Top