I am reloading 270 WIN. My brass is at the recommended length but with a Hornady V-Max 110 gr bullet, it is short of the oal for a completed cartridge. Is this a problem?
270 WIN reloading
- Thread starter Coopdog409
- Start date
I'm not 100% sure what you're asking for guidance on, so I'll take a SWAG and hope that it helps.
The Hornady 8th edition manual recommends a COL of 3.165" for the 110 grain V-Max.
Hodgdon load data recommends a COL of 3.100" for the 110 grain V-Max.
In either case, you're likely to have a pretty good jump before the bullet engages the rifling in your barrel.
The Hornady 8th edition manual recommends a COL of 3.165" for the 110 grain V-Max.
Hodgdon load data recommends a COL of 3.100" for the 110 grain V-Max.
In either case, you're likely to have a pretty good jump before the bullet engages the rifling in your barrel.
Coyotefurharvester
Silver $$ Contributor
That bullet has a cannelure(for crimping) where are you seating to in relation to the cannelure?
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.