.268 Neck 6 PPC Bushings

[DaWhit]

Have a PPC barrel ordered and accumulating necessities.
Like to try SAC’s bushings but at $35 a pop like to pick a couple of the most popular sizes to keep costs down.

Seen where some mentioned ordering a size smaller than usually used with Redding, etc.?

Any help and advice appreciated.

 

[Bill Norris]

I have a .268 chamber neck as well. My loaded neck diameter is @ .2655 and I have Wilson .261 - .264 bushings. At the present I am using .262 but will do more testing once cooler weather comes around. Wilson bushings seem to be more accurate with the identifying number size than Redding.

 

[bichettereds]

It will depend upon what you turn your necks to and what powder you use, but .262-.264 should cover it.

 

[WyleWD]

I've got a few .268 chamber necks also. A couple bullets I use upon occasion noticeably prefer the .261 marked bushings. So I'd recommend .261-.264. JME. WD

 

[quest450]

Midwayusa still has them on sale
not ppc but my BRA brass is turned to .011" and I use .262" bushing

Short Action Customs Neck Sizer Die Bushing 290 Diameter

Short Action Customs Neck Sizer Die Bushings have minimized neck runout in cartridge brass in nearly every die tested. After attempting to eliminate and...

www.midwayusa.com