• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

260ai/6.5x47lapua to 6.5 creedmoor?

I have a Rem 260AI barrel I got on this site years ago and also, every now and then a 6.5L will come up for sale. Been looking for 6.5AI case dimensions, but no luck so far.
Plan on making a 6.5 Creedmooor and wondering about setting back the AI barrel about 1/8" and rechambering or possibly doing the same to a 6.5 Lapua barrel.

Feasable?
 
Hello Sir,

These figures are according to my 260 AI, 6.5 x 47L & 6.5 Creedmoor prints :
260 A I : case head to body shoulder junction = 1.658, across the body shoulder junction= .460

6.5 x 47L : case head to body shoulder junction = 1.400, across the body shoulder junction = .4578

6.5 creedmoor : case head to body shoulder junction = 1.4864, across the body shoulder junction = .463

I hope this helps.

jaclthr
 
It helps quite a bit, thank you very much. Setback is going to be closer to 3/16", but doable. Just got my reamer in today, but no hurry, too cold out to shoot at our range right now!!!!
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,804
Messages
2,223,786
Members
79,867
Latest member
Steve1984
Back
Top