260 Remington reamer

[liseo]

Hi

I need a 260 reamer for Lapua brass. What neck diameter for 0.0025" to 0.004 " neck clearance on loaded round?

I know this will vary with brass lot and bullets used, but wanted a approximate measurement(dont have the brass to measure wall thickness)


Thanks

 

[idahoorion]

liseo, I have a reamer for .297 neck, .079 freebore (AICS mag length) 1.30 260 Rem tac match that has chambered three barrels. works well with Lapua. works with 140's to 120's for sure. Brass has been annealed every three firings and goes double digit loads and still going. I have moved to a 6mm for PRS type shooting so this could be had if interested.

Idahoorion

 

[Ramblerman]

I know it's an extremely old post...but any chance you still have that reamer?

 

[Shawnba67]

I know it's an extremely old post...but any chance you still have that reamer?

Probly higher chance than him seeing your post. send a pm
Gotta quote them for them to get notified.

 

[mrjdasr]

I know it's an extremely old post...but any chance you still have that reamer?

I have a PT&G that has only done one chamber pretty sure its a .297 neck
got 100 Peterson brass for sale also been fired 5 times, has been neck turned for a better bullet fit
and a whidden full length bushing die
I have changed to 6.5x47 lapua
PM me if interested

 

[Ramblerman]

Cool, what's the freebore on that reamer?

 

[Ramblerman]

I have a PT&G that has only done one chamber pretty sure its a .297 neck
got 100 Peterson brass for sale also been fired 5 times, has been neck turned for a better bullet fit
and a whidden full length bushing die
I have changed to 6.5x47 lapua
PM me if interested

pm sent

 

[idahoorion]

I know it's an extremely old post...but any chance you still have that reamer?

 

[idahoorion]

yes I do pm sent.

Idahoorion

 

[Ramblerman]

yes I do pm sent.

Idahoorion

sorry gents, but I guess I need a .299 neck after taking a measurement of my LC brass....which is a big reason I shoot the 260. I'll post a want ad. thanks!!