.260 Rem/ 140gr Berger BLD hunting

[GC Hunter]

Anyone have any load data for the .260 rem using 140gr Berger VLD hunting bullets? Will be trying these in a remington model 7. I have IMR4831,4895,4350, and hVarget. Any data will be appreciated.

 

[GSPV]

If you can get your hands on it, there is good data in Berger's manual. Pay special attention to seating depth. We shoot 130s in my son's 260. It shoots like a laser with them jammed hard but opens up to softball sized seated deeper in the case.

 

[jcann]

I found my node at 43.5gr of H4350 with 140gr Berger hunting VLD's. I'm using Rem brass and CCI BR 2 primers. Velocity is 2,830. I can run them a little hotter but they shoot great out to 600yds.

 

[harleyreb1]

44.2 grs og H4350 in lapua brass 10 off lans, with fed 210m just over 2900fps w/26" barrel

 

[RHux]

.010 jam 42gr H4350 CCI BR 1" at 200yds 140 VLD

 

[HTSmith]

My load is 42.0 H4350, Fed 210match, and Lapua brass, .010 Jammed. IMR 4350 should be close.

 

[trailrider121]

Varget is super accurate in my rifle. Look around 38grs with 140's. It will be a little slower be accurate. Let us know how it goes.

 

[kev77]

H-4350 42.5gr fed 210m 20th off 2855fps. shoots 2 inch 10 round groups at 500yards. have gone up to 44gr but really hard on brass in my gun! Good luck.

 

[kochie]

i am thinking about buying a reamer for a 260 rem builded i have a 6 br for up to 600 yds was think about the 260 out to a 1000yds what do you guys think about the 260 at a 1000 yds and any thoughts on the reamer any info would be helpful i see lapua came out with a new bullet 136 grain scenar .

 

[kochie]

sorry for highjacking this thread i just seen it was about the 260 and didn't think for a moment