25x47L neck diameter

[RAG]

Waiting for my .282 bushing and bullets to show. For those of you with 25x47, what's the neck diameter of your loaded, unturned, necks coming to?

I was assuming/guessing .284 or .2845, but would like to see actuals...

Thanks!

 

[nakneker]

I’m using 6.5x47 Lapua brass necked down with a BIB 110. OD is .2845

 

[KMart]

6.5x 47 Lapua brass
Reamer neck .283
Neck turned to .0115 thickness
Loaded round, .281 with 115 Berger.

 

[newbieshooter]

6.5x47 No-turn Lapua brass necked down
Loaded round neck OD = .284 seated with a Berger 25cal 135gr LRHT

 

[284winner]

Waiting for my .282 bushing and bullets to show. For those of you with 25x47, what's the neck diameter of your loaded, unturned, necks coming to?

I was assuming/guessing .284 or .2845, but would like to see actuals...

Thanks!

About that exactly, Lapua brass, no turn.

 

[RAG]

About that exactly, Lapua brass, no turn.

Thanks!

 

[RAG]

Bushings and bullets finally arrived. Sized and loaded a few...my lot comes to an average of about .2835, with low and high sides ranging from .2825 and .2840, using good micrometer, not calipers. With Berger 135 LRHT.

My no-turn reamer i have in order is .2865. I suppose I might leave it; otherwise .2860 would be ideal for my lot of brass/liking