• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

.243 Winny 105 Hybrid Loads

I've started some rather extensive load development in my 8T 243 Win with a 22" tube. This is my first post on the Hide. I've not chronographed the load I've liked the best so far yet so I'm not sure of SD or ES. I was going to find a few good accuracy nodes with a couple different powders then run them all over a chronograph and go from there. The load I've come up with so far is 41.7 Gr of H4350. It shoots well between 1/4 and 1/2 MOA and I haven't played any with seating depth. If I had to guess its probably in the neighborhood of 3000 FPS. I got to 42.0 Gr with no pressure signs. I'm going to work up to 43 in .1 Grain increments. Anyone have any Retumbo or H1000 recipes I could work up to just to have a couple options?
 
First off this isnt the hide. Second dont worry about how it chronos if you find a load that shoots. Paper matters way more. Hodgdon manual says h1000 should be compressed at around 46gr at 2900fps. I concur. Very good load but hard on brass and barrel. Doesnt matter to me. Id go around 44 and work up but id go in .2gr steps- no need to wear your barrel out shooting steps most cant even measure reliably.
 
I started long range bench rest with a 243 WIN. I started with H4350 and changed to H1000 on advice that it is easier on the barrel. I also use hBN. I tried RL-17 but couldn't get it to shoot reliably.

With a 28" barrel I used 46 gr of H1000 for right at 2900 fps.

And, I did get good life from the barrel, for a 243 WIN!
 
Sorry I copy and pasted my post from the Hide and forgot to delete that part. Second I don't really care about speed much I want to chrono to check SD. I may do a quick ladder test in .2 gr increments with H1000 just to test the waters. I'm gonna go from 41.5 to 43 in .2 gr increments with H4350 as well. I was seeing zero pressure signs at 42 so I might as well see what I can get out of it. May get lucky and find something that shoots a hair better.
 
Can I ask whose barrel and chamber are you using for the 243 with 105 hybrids? Pretty sure I'm going to do a 243 on a Savage Target Action so I'm wondering if any of the prefit guys cut a nice chamber / freebore for the 243 using the 105's.

Thanks
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,347
Messages
2,217,026
Members
79,565
Latest member
kwcabin3
Back
Top