.243 load 75gr. VMax

[PepeLp]

I'm going to try the 75gr. VMax's in a standard .243. I need load info, and have the following powders: Varget, H414, RE 15 & 19, IMR & H 4350.

I found a load with 46.0gr. of H414 and will try that, but any other info will be appreciated.

Thanks.

 

[Chuckhunter]

Here's a good place to start. You can select by Powder, Bullet, or bullet weight.
http://www.reloadersnest.com/frontpage.asp?CaliberID=5

 

[expiper]

These are not loads from the internet....I have used these with success or I wouldnt be givin um to ya.....41gr Rx-15...45.5gr 4350,aussie-Extreme-etc--the ole Scottish requred aprox 1.5gr more)...Roger

 

[browning]

I run 45.5gns H414 lit by Federal 210 primer in Lapua brass.

No signs of pressure and wonderfully accurate.

Obviousely this is in my rifle and you should work up carefully.

 

[PepeLp]

Thanks a lot for all the help guys.

I ended up with 45.5gr. H414. 46 was listed as max, but it was a little hot in my rifle. It's running right at 3,200 fps.

Take care.