.243 95 grain nosler partition loads

[minnesota]

I was wondering if any of you have any good loads for the 243 win, 6mm rem, or the 243 wssm, using the 95 grain partition.

 

[Klong]

243 WSSM 95 gr Partition 41 gr H4350 215M primer Shoots well for me!.

 

[TheOtherZilla]

I use the 95 Nosler partition in my hunting 243, and have for years.. IMR 4350 works here..

 

[HillbillySniper]

Try 34 grains of Varget with standard cci primer


Hillbilly

 

[roninflag]

WHOLE LOT OF H-I 4350 OR H-4831

 

[Larryh128]

Obviously you're looking for a good deer load. The 95 partion is a decent bullet but look at the 80 gr Barnes TSX. More velocity & stays together after opening up. You will get complete pass thrus. I have played with a lot of 6mm bullets because we get some young hunters that can't handle a lot of recoil. Or we don't want them to. You will be happy with the Barnes loaded with a close to top charge of H4350. Data can be gotten off of the Barnes Website. I like Noslers as well but this is the bullet for deer in 6mm.

 

[rogn]

Im really fond of the TSX but Ive been using the 95 partition for the last 15 or so years and never had a failure of any kind. Some are DRT some run a bit, but they are down. Smashes bones, gives good but not excessive exit wounds. Not too much blood shot meat(aproblem w/excess velocity re: 80 gr)either. Load is most often,WW brass, CCI BR2, and with H4831sc, enough to exceed 3000fps w/22" barrel. Accuracy in 2 rifles is<moa