• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

223AI freebore question

I ordered a 223AI 1:7 Savage prefit barrel yesterday and was told the freebore is 0.061".

Is that acceptable throat for running the 75/80gr A-Max?

Is it too short for 90gr Bergers, either the VLD or BTLR?

Thanks!!!
 
The freebore on my .223AI set up for 75 A-Max is exactly .100, so your bullets that you want to shoot may be too long. What barrel company makes your prefit?

Frank
 
40X Guy said:
The freebore on my .223AI set up for 75 A-Max is exactly .100, so your bullets that you want to shoot may be too long. What barrel company makes your prefit?

Criterion, the button rifle division of Krieger.

I was told by Jim Briggs @ NSS that Criterion's standard 223 chambers are 0.025", the 223AI 0.061", and the 223 Wylde 0.078".

I currently have a factory Savage 1:9 223 Rem barrel, and a COAL of 2.465" puts me at the lands with the 75gr A-Max in that tube.
 
My COAL @ the lands is 2.542 with 75 A-Max and lapua brass. Puts the juncture of the boattail/ogive just above the neck shoulder junction. My heights are off a tad in pic but this gives you an idea.

Frank
 

Attachments

  • DSC02462.JPG
    DSC02462.JPG
    140.8 KB · Views: 285
40X Guy said:
My COAL @ the lands is 2.542 with 75 A-Max and lapua brass.

Your freebore is 0.075" greater than the standard 223 chamber at 0.025", so if I add that to my 2.465" OAL to the lands that makes 2.54"...within two thousandths of your length.

If my math and reasoning is correct (???), a 0.061" chamber should place the 75gr A-Max about 2.504" OAL.

That would work nicely.
 
You should be fine with a .061 freebore and 75 A-Max. Anything heavier you lose powder capacity especially with the 90's. In my rifle I am at .010 off the lands and will be doing a seating depth test tonite and will be seating them back to .020 or .025 off the lands. So the extra freebore helps with bullets that like a jump.

Frank
 
I think you'll be fine, may be a tad on the short side for 90 gr. bullets.

I had my 223AI reamer freebore cut to .077. That puts a loaded 75 gr. A-Max to a max OAL to the lands at 2.520.
The max. OAL to lands for MY CHAMBER:
75 gr. Hornady HPBT - 2.364
80.5 gr. Berger FB - 2.479
80 gr. Berger VLD - 2.473 (bullet shank seating depth into the case neck about .200)

B
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,823
Messages
2,203,901
Members
79,144
Latest member
BCB1
Back
Top