223 Wylde bolt/75g ELDMs nailed

[CADDIE5]

75eldm works fine in 30"brux 7T 223rem @300yds

 

[kyotekiller25]

What

75eldm works fine in 30"brux 7T 223rem @300yds

Is that a 20 shot 2.6" group I'm looking at then?

 

[William Vogel]

Mine liked 24.2 TAC and sent them 2980. Now it’s AI and 25.8 gets me 3100.

 

[Cfshooter]

By the way this is what 24.5 did with 10@100. Someone told me that 24.5 would be better based off what they saw in my previous work ups. I didn't really think so, but thought I'd see anyway. Slightly bigger overall, but still 10 right at 1 MOA. The vertical is pretty nasty also...Going with the 24.7 loadView attachment 1551730

I think that was me that said that. Looks like they both shoot well. Probably couldn’t tell the difference if you shot multiple groups of each.

 

[CADDIE5]

What

Is that a 20 shot 2.6" group I'm looking at then?

Yes

 

[Andy Legg]

We shot the 75 eldm out to 1000 this past weekend at Bayou Rifles out of an NRA legal AR Tactical Rifle (20" 1/7 .223 WOA Barrel).

They were just barely above supersonic at 1000, but the 16 we fired at 1000 were all picked up by the E-Target (Shotmarker). Vertical was pretty amazing to me (about 10-12")....wind call was pretty tricky, but Logan (13 year old son) did a really good job of keeping them in the 10 Ring.

We are using LC Brass, 8208xbr (23.4), FGMM 205MAR Primers and seating to COAL 2.387" (Same load we use with 77 SMK's loaded at COAL 2.260" mag length). They are launching at around 2840 fps and still going around 1800 at 600 yards.....just barely above Mach 1 at 1000 yards. Note: YMMV..

Looking very forward to shooting more at 600 & 1000 yards.