Ok thanks guys I’m running a bolt gun but always start out low & work up.I've had some really good accuracy with TAC and 68/69/70 grain bullets. It is a bit temp sensitive.
I see you have a bolt action, what barrel length?Anyone got any pet loads for the 223 bullet weights between 69 to 80 grains I have some 88 grain bullets but not sure if a 8 twist will work with the 88 grainers
Ok thanksHaving a good "surprising" run from 77TMKs, 8208XBR and CCI 400s in a Savage 12BVSS 1-9. Stumbled onto this as a goof.
That VV N140 is good powder but can be hard to find .Ok thanks
barrel 24 inchesI see you have a bolt action, what barrel length?
Ok thanks don’t have any 8208 powder right now .75 or 77 with 23-23.8 of 8208 with a CCI#450
25.5 of W748 with a 69 smk
I've mentioned my load on here before about 23.2 8208 behind a 77TMK. The problem is that you cannot find 8208 these daysHaving a good "surprising" run from 77TMKs, 8208XBR and CCI 400s in a Savage 12BVSS 1-9. Stumbled onto this as a goof.
Absolutely about the 8208, I did not intend to disappoint. I probaly should not advise on how much I'm sitting on right now. My bad.I've mentioned my load on here before about 23.2 8208 behind a 77TMK. The problem is that you cannot find 8208 these days![]()
I don’t even want to know!!!!Absolutely about the 8208, I did not intend to disappoint. I probaly should not advise on how much I'm sitting on right now. My bad.![]()
LolAbsolutely about the 8208, I did not intend to disappoint. I probaly should not advise on how much I'm sitting on right now. My bad.![]()
Ok thanks I have CFE 223Lol
I have a bit of a stash of 8208 as well
Tac is another great alternative.
CFE223 as well
Ok thanks I have both of them
Ok thanks I have some TacTac is h4895 is 8208 is AR Comp
In terms of burn rate these loads are nearly interchangeable.