.222x35 FL Die

[centershot]

My project to put together my .222x35 has gone well. It shoots great using LT-32 and Berger Bullets. I was using a Wilson neck die but now need a FL die. Need to bump the shoulder back and size the web of the casing. I have contacted Reddding, but so far no reply. Any other ideas as to who may make, or have, a die for this. I guess the preference would be for a bushing die.

 

[Phil]

Have you talked with Whidden????

 

[centershot]

BTW, I have the chamber reamer as well as the print of the reamer.

 

[snert]

Call Redding and speak with AJ 607-753-3331

 

[20 TAC]

Talk with the folks at Whidden. Send them your reamer print and you can have a FL bushing die in about 8 weeks from my experiences. Quality and service outstanding.

 

[lpreddick]

Ditto. I sent my reamer print to Whidden Gun works and they are making the fl/bushing die and micro.seater for my modified 6x47(222rem mag). The people there know their stuff! They also use CRT's bushings which are fantanstic and less expensive than redding's titanium nitride. The numbers on CRT's are laser imprinted so they work numbers up and numbers down. Numbers up with redding and the bushing can tip a bit when pushed to the top of the die's cavity.