22 br brass
- Thread starter Ed Gwyn
- Start date
bozo699
Gold $$ Contributor
passenthru,
contact NorCalMikie here on the forum, I have bought 22 br brass from him in the past and have seen him sell 22br brass through 30 br brass on our classifieds, hope this helps some, as far as resizing 6br lapua brass yes I have done that before, no problem.
Wayne.
contact NorCalMikie here on the forum, I have bought 22 br brass from him in the past and have seen him sell 22br brass through 30 br brass on our classifieds, hope this helps some, as far as resizing 6br lapua brass yes I have done that before, no problem.
Wayne.
Preacher
Gold $$ Contributor
Absolutely no problem necking down 6 br brass to 22 br brass in one pass with a FL die of your choice.
I use a Redding die to do mine, and then on to a custom Warner die...
If you have the older Remington chamber, you will need to trim them back...
I probably would rechamber it......
I use a Redding die to do mine, and then on to a custom Warner die...
If you have the older Remington chamber, you will need to trim them back...
I probably would rechamber it......
NorCalMikie
Gold $$ Contributor
Wayne: I just sent him an Email. Like Preacher mentioned, if it'a an "older" chambering it's probably cut to Remington brass specs. Him knowing the actual chamber length would help a bunch. A rechamber would make things a lot easier for him with better brass available. 
bozo699
Gold $$ Contributor
Mike,
I didn't know if you would see the thread or not so I through your name out there as I have purchased brass from you in the past and was very happy with our deal so I thought I would try to hook the two of you up, hope it works out for both of you, take care Mike and hope to talk again soon.
Wayne.
I didn't know if you would see the thread or not so I through your name out there as I have purchased brass from you in the past and was very happy with our deal so I thought I would try to hook the two of you up, hope it works out for both of you, take care Mike and hope to talk again soon.
Wayne.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.