22-250ai

[autoparts]

Ok
Thanks

 

[10XSHOOTER]

When doing an Ackley chamber. Your go gauge becomes the No-Go gauge!

 

[paperpuncher]

When doing an Ackley chamber. Your go gauge becomes the No-Go gauge!

OP stated they he has 22-250 AI headspace gauges so this would not apply I would hope the gauges are in fact to specifications

Already been stated but I think it may have been long chambered, doesn’t matter at this point. I would ream it till the original chamber is cleared out , then adjust the tenon and thread to provide proper headspace and bolt clearance and then do load development . As mention it will require a lathe

 

[autoparts]

Thanks all will not be able to see a real gunsmith for a couple weeks.
But I am still confused what part of the AI chamber is shorter sorry to waste your time.
Thanks

 

[paperpuncher]

Thanks all will not be able to see a real gunsmith for a couple weeks.
But I am still confused what part of the AI chamber is shorter sorry to waste your time.
Thanks

The distance from the bolt face to the neck shoulder junction It shows on the print you posted. 1.644 AI vs1.664 for the standard

 

[autoparts]

Got it looked at print 20 times and still missed that.
Thanks

 

[Edd]

I don't think the dimensions in that image are true AI dimensions.

 

[autoparts]

yea they may not be.
The whole problem started with the gun not being a short chamber or me not checking to make sure what I got. Not done yet may try a 22-243ai .
Thanks
Butch