• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

22-250Ai load

I have this posted in varmint section but thought I might get more input here.
Been playing with my new PD rifle but haven't found a satisfactory load 1-12 28" Krieger. I'm shooting 52 grain SMK's trimmed and pointed. I'm not a speed freak just want a accurate load, this is a custom built rifle on a Preditor action Jewel trigger laminated stock pillar and full bed. Built by a top gunsmith. This rifle should be capable of 1/4 at 100, but haven't got ther yet. I have a good assortment of powder so shoot me a load ( pun intended!) I am touching lands at 2.02 base to ojive measured with a Davidson seating depth tool. .013 necks sized with a .249 bitching and run back over a .222 expander mandrel for a .002 neck tension , consistant 24-26 lb seating pressure as measured with a 21st Century hyd bullet seater. Win brass is sorted and weighed with full prep.I hope that's enough info. I do have some Nosler 55grain Varmegedon FB and some 50 grain A-Max's and a few 50 grain Bergers, but I prefer the Sierras as I have a bunch and the are sorted trimmed and tipped.Any tried and tested info appreciated.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
167,268
Messages
2,229,459
Members
80,301
Latest member
Featherweight1910
Back
Top