22-250 nosler brass

[bouch9]

Has anyone else had troubles with the primer pockets being too large on nosler 22-250 brass, I can literally install primers with my thumb and some fall right out. I've tried 2 different types of primers with the same results, just curious because this could be a dangerous situation

 

[L.Sherm]

If its new brass send it back, if not then your over pressure for the brass.

 

[bouch9]

If its new brass send it back, if not then your over pressure for the brass.

It's new brass, I contacted nosler yesterday, waiting on their reply.

 

[L.Sherm]

It's new brass, I contacted nosler yesterday, waiting on their reply.

Get your money back and buy Lapua you will be alot happier.
Natchez has Lapua for 126.00 a 100

 

[Gary in MD]

Yep, Request your money back and get some Lapua or older blue bag Winchester

 

[Walt Krafft]

Try some Sig brass. You will like it.

 

[bouch9]

Thanks for the replies, seems like when I make a purchase of reloading supplies they're out of stock on items I'd like to try, so I stock up on items that are available

 

[Clancy]

You may have trouble with Lapua in a SAAMI chamber. I did. The Lapua is CIP spec.

@AckleymanII can explain it better than I can.

 

[Coyotefurharvester]

Sig 22-250 brass is available and is high quality. I can't run Lapua in my minimum SAAMI chamber.

 

[AckleymanII]

Lapua = .468 at the web
Winchester = .466 at the web

Factory chambers can be sloppy, allowing the Lapua to work, but custom barrels are another can of worms.

Same thing for 243 Win, 260 Rem, 7/08, and 30/06.