WANTED 22-250 Brass

[DR1586]

I need to make some 6XC brass and want a large lot (500-1000 pieces) of 22-250 brass. Once fired is ok, new is ok. Surely one of the varmint hunters on here has a bunch of 22-250 that they saved and never used. Let me know what you have.

 

[Dstaffk5]

I have some listed on here.

 

[Dstaffk5]

@hawken79 has some listed as well...

 

[DR1586]

@hawken79 has some listed as well...

Thanks, but I’m looking for a larger lot of brass. I tend to work batches of 500 or more given the amount of shooting I do.

 

[r bose]

Sending PM

 

[willyp19]

I have a bunch of once fired Winchester and Remington brass, probably a couple hundred of each.

 

[plinker625]

Here is a good deal on new Nosler 22-250 https://www.gunstop.com/products/br.../nosler-22-250-remington-100-count-bulk-brass

 

[jimed]

Think I have 300 new Winchester 22-250 brass.

 

[ebb]

Could you make 22-250 from 6 or 6.5 Creedmoor? Many places on the net say 22-250 can be made into Creedmoor, will it work backwards? If I were going to remake this much brass to get the 500-1000 rounds you are looking for, I would not want to do it using Rem or Win brass. I would want quality brass to start with Creedmoor is made by Starline, Alpha, Lapua and Peterson maybe more. My only concern would be it coming out too short.

 

[ricco1949]

Send me a PM if your interested in these.

I'd estimate 4-6 firings on Winny's and Lapua's and 2-4 on the Normas.....pockets are all good. It's been nearly a couple decades since last fired. Some boxes are still loaded with 87s or 107s for LR PDn. I'll pull bullets and powder on those.

Necks are turned to .270+/- loaded.

About 175 primed.

Winny's made from 22-250s.
Lapua's made from .243s.
Norma's are XCs from Tubb.