H2OBUG
Silver $$ Contributor
I just started loading for the 22-250 and I have some new and some used brass the used brass is Winchester and R-P-- I am finding that the R-P brass seems to be thiner and the brass seem to be springing at the sholder in my die. I am putting a good FL size on this used brass so it will chamber in my gun with no problem. As it bottoms out the brass is springing back rather than pushing the sholder like it should.
It will chamber but it is a bit tight
Scrap it or go ahead and use it- it is only 50 rnds
It will chamber but it is a bit tight
Scrap it or go ahead and use it- it is only 50 rnds